EO82 Offline Mini-Wave System

The Streckfuss model E082 selective soldering system is an off-line process especially suited for low volume, high mix applications. It’s design offers maximum flexibility through the use of an x-y-z axis conveyor system that eliminates the need for board holders, stencils or masks. The operator interface is via a personal computer running the system software under Windows 2000. The graphics based software displays both set points and actual values for all controllable parameters. Programming is step & teach via a joystick controller and a 3 camera vision system.

Features                                          Specifications
X,Y,Z Conveyor System	Dimensions: 1450mm L x 950mm W x 1260mm H (57.0" L x 37.0" W x 50.0" H)
Interchangeable Product Carriers or Stencils	Electrical: 400Vac, 3Ø, 50/60Hz, 25kw (220Vac, 3Ø, 50/60Hz, 25kw)
Spray or Dispensing Needle Flux Application	Nitrogen: 3-6 m³/hr (105-211 ft³/hr) - Optional
Regulation of Flux Application Volume	Pneumatic: 6 bar (90psi)
Flux Supplied From Original Container	Exhaust: 600 m³/hr (21,000 ft³/hr)
Low Level Sensor For The Flux Container	Solder Bath: 80kg (176lbs) - Standard
Medium-Wave IR Quartz Pre-Heating Elements	Solderable Area: 300mm L x 330mm W - Standard (11.8" L x 13.0" W)
Pre-Heat Temperature Rise Controlled to 2° C/Sec.
Optional IR Pyrometer for Pre-Heat
Dual Chamber Solder Bath
Removable Belt Drive Solder Pump Assembly
Optional Localized N2 Inert Atmosphere
Flowing Fountain or Surface Area Solder Nozzle
Top of Page