|
VIPs Vapor Phase Soldering
System | FlowCool Mini
|
VIPs
Vapor Phase System for Prototype to Low Volume Applications |
|
VIPs is
a programmable vapor phase soldering system for prototype and low volume
applications.
With a solvent amount
of only 5 kg VIPs
can solder difficult
assemblies including PCB’s with large BGA’s without the risk of
overheating or damaging components. The soldering system consists of a
single closed processing chamber. The glass covering allows visual
monitoring of the soldering process. A gate system efficiently prevents
unnecessary losses of solvent. The VIPs
uses a Siemens S7-control
system that allows for easy programming of the soldering process. Up to 99
soldering profiles can be pre-programmed and stored. Connected to an
external water supply, VIPs does
not only monitor the temperature of the vapor phase, but also that of the
outer wall of the machine. (An optional closed loop water-cooling system
can be integrated). Temperature monitoring systems show the current
processing status. The processing chamber is made from polished steel and
is easy to clean. Solvents with boiling points of up to 270°C are
suitable for VIPs .
| Technical Data:
|
|
|
|
PCB
dimensions
|
mm:
|
250
x 400
|
|
Solvent
|
Type:
|
Up
to 270°C
|
|
Solvent
volume
|
Kg:
|
5
|
|
Control
system
|
:
|
PLC
|
|
Power
connections
|
V/Hz
:
|
400/50/3
phases
|
|
Power
input max.
|
kW:
|
2.4
|
|
Power
consumption
|
kW/h:
|
Approx.
2.5
|
|
Water
pressure
|
bar:
|
4
|
|
Water
consumption
|
L/min:
|
Approx.
1.5
|
|
Solvent
consumption
(10
LP/h without components)
|
G/h
|
Approx.
2
|
|
Weight
|
Kg:
|
90
|
|
Dimensions
W x D x H
|
mm:
|
1500
x 760 x 800
|
|
|
|
|
|
|
|
FlowCool
Mini
FCM 16 Recirculating Chiller for the VIPs
From Streckfuss
|
|
FlowCool
Mini
FCM16 is
an air-cooled recirculating chiller that provides a continuous supply of
cooled and clean water at a constant temperature. It prevents problems
commonly associated with using mains water, such as fluctuations in
temperature, pressure and fouling due to lime, algae, rust, etc.. It has a
plastic tank with water level indicator and interior-mounted evaporator.
The filler port is on upper side of system and includes a manual drain
valve. The thermostat is microprocessor controlled and has a digital
display (LED) with limit monitoring.
| Technical Data:
|
|
|
|
Refrigerant
|
CFC-free :
|
R134a
|
|
Net cooling
capacity at +20/+15°C
|
kW :
|
1.9 / 1.7
|
|
Eff. cooling
capacity at +20/+15°C
|
kW :
|
1.5 / 1.3
|
|
Operating
range
|
°C
:
|
+7 / +30
|
|
Temperature stability
|
K :
|
± 2
|
|
Rated coolant
flow
|
m3/h :
|
1.2
|
|
Pump
|
type
:
|
P3-J12A
|
|
Pump capacity
|
litres/min :
|
8 - 38
|
|
Pump pressure
|
bar :
|
0.5 – 4.0
|
|
Tank
capacity
|
litres :
|
5
|
|
Water
connection
|
Inch :
|
R
½” (female)
|
|
Required
flow of cooling air
|
m3/h :
|
910
|
|
Starting
current
|
Amps :
|
24
|
|
Power
input max.
|
kW :
|
1.6
|
|
Operating
voltage
|
V/Hz :
|
230/60
(single phase)
|
|
Weight
|
kg :
|
50
|
|
Dimensions
W x D x H
|
mm :
|
700
x 425 x 335
|
|
|
|
Top of Page
|
